Honda Rear Camber Arms
$461.95 AUD
Adjustable rear camber arms with additional benefits over traditional designs for golden era Hondas. These arms have an inboard height adjustment to correct a rear suspension geometry feature called swing axle length.
Kit Contents
Pair of adjustable rear camber arm assemblies
Set up table
Installation Instructions
Fitment
87-91 Honda Civic EF/ED
88-91 Honda CR-X
88-91 Honda Integra DA
92-95 Honda Civic EG
96-01 Honda Civic EK
94-01 Honda Integra DC2
Installation Instructions
3 in stock (can be backordered)
This kit includes a pair of components that replace the OEM fixed length rear upper control arms and allow rear wheel camber to be adjusted.
Adjustable Rear Camber Arm
- Length adjustable for rear wheel camber. Camber adjustment range +1 degree/-3 degrees
- Height adjustable for the purpose of correcting swing axle length on lowered cars (this only applies when used with Honed rear roll centre correction kit)
After installing this product we strongly recommend getting your car aligned, Honed’s alignment recommendations can be found here
Now supplied with inboard 0.5 degree camber shims!
These allow for fast rear camber adjustment without the need to re-align the car* during an event.
*Disclaimer: It is important to understand how alignment settings affect the handling of your vehicle, if in doubt seek the advice of a professional.
The addition or removal of the camber shim will result in a 0.5 degree change in the rear camber setting.
If increasing camber by 0.5 degree (removing a shim) this will result in a corresponding 0.3mm (~1/64″) toe out change.
If reducing camber by 0.5 degree (adding a shim) this will result in a corresponding 0.3mm (~1/64″) toe in change.
The recommended way to use these shims is to have your car aligned with a single shim installed to your initial target rear camber and then only adjust when necessary.
The shims extend past the camber arm housing so you can see if they are installed/how many are installed.
14 reviews for Honda Rear Camber Arms
Only logged in customers who have purchased this product may leave a review.
Adam Davison (verified owner) –
Beyond adjustable, highest attention to detail. Surpassed my expectations
Sam Hackelton (verified owner) –
unbeatable quality
Ricardo M. (verified owner) –
You can tell a lot of thought was put into this product. Product that is made for performance.
Ian Murphy (verified owner) –
The quality of these parts are exceptional. It really does show in the craftsmanship that the guys at Honed are interested in their products performance. Instructions are very well written and images are clear and easy to understand. Looking forward to testing these out and would definately consider purchasing more stuff in the future. Shipping from Aus to the US was also faster than I expected.
Leandro Dilim (verified owner) –
Quality products and awesome customer service!
Brent W. (verified owner) –
Fantastic quality and packaging. Installation instructions are clear. Adjustment and jam nut are easily accessible during alignment.
Daniel Erdinger (verified owner) –
Mitchell A. (verified owner) –
Excellent quality, and a great turn around time. Tom and Grant have outdone themselves with this one. Always happy to help with advice, 10/10 would recommend to anyone.
Reginald Seecharran (verified owner) –
Very well made and easy to adjust.
Love this product.
Rocky Ali (verified owner) –
The quality of these arms are impeccable. Great product at a great price!
Ramon Ceja (verified owner) –
Amazing quality in material and design. Built to last on the track and streets.
dayne cork (verified owner) –
Braydon Barron (verified owner) –
Justin Rivera (verified owner) –
I planned to go with a mix of suspension parts until I discovered Honed products, they really did their homework on these parts so I decided to purchase all of my remaining components from them, craftsmanship is great! Tom was very quick to respond to my questions. Thank you for the great customer service!