While the Honda Fit/Jazz doesn’t have the adjustability of earlier double wishbone/multi-link Civics, some small tweaks to parts and geometry can result in large dynamic improvements. Here is Honed’s receipe for suspension success on the GE8-generation.
GEOMETRY
- Ride height: 290-275mm (hub to apex of guard)
- OE front lower ball joint
- Honed strut top to increase caster and camber – LINK
- Camber bolts for maximum knuckle adjustment
SPRINGS & DAMPERS
- Front springs: 6kg/mm (results in ~2Hz suspension frequency)
- Rear springs: 6kg/mm (results in 2.2Hz suspension frequency)
- Dampers to suit spring rates
ANTI-ROLL BARS
- Stock front bar
- Aftermarket rear bar 16mm diameter or similar
WHEEL ALIGNMENT
- Front camber: -3.5-4.5°
- Front caster: +2-2.5°
- Front toe: 0°
- Rear camber: Not adjustable
- Rear toe: +2 (in)-0°
This is applicable to second-generation Honda Fit/Jazz models. Where a range is given it is listed from conservative to aggressive and should be selected based on tyre and driver preference.
RELATED POSTS
Thunder Grey DC2 VTi-R: Modified Trailing Arms Installed
**This post has been transferred from my long running build thread on Honda-Tech.** I’m going to re-post the thread on this site for the benefit of the people that are not active in the forums but will still appreciate the content. The photos might not be as good as...
Thunder Grey DC2 VTi-R: Carbon Sunroof Plug
Thunder Grey DC2 VTi-R Build 5: Carbon Sunroof Plug
Thunder Grey DC2 VTi-R: ABS Delete and New Fuel Pump
**This post has been transferred from my long running build thread on Honda-Tech.** I’m going to re-post the thread on this site for the benefit of the people that are not active in the forums but will still appreciate the content. The photos might not be as good as...