GD3 Strut Top
$479.00 AUD
A front strut top that adds negative camber and caster to the Honda Jazz/Fit chassis
For the purpose of improved high-speed stability and handling
- Adds 1 deg of caster (positive)
- Allows for an additional -1 degree of camber. We recommend combining with camber bolts in the knuckle-to-strut connection for an achievable camber range of -3 to -4 degrees.
Vehicle Fitment
- 02-08 Honda Jazz GD
Confirmed Compatible Coilovers
- BC Racing
- S3 Suspension
1 in stock (can be backordered)
So if roll centre correction is not the thing for the Jazz/Fit (GD3) chassis, then what are the opportunities for improving the front suspension? Well, increasing camber, caster and also bump travel. Once we had this understanding we jumped into designing and manufacturing our take on the best possible front strut top for the GD3 chassis. We decided to forgo having any adjustments in the strut top for a fixed offset design. This has the benefit of being low profile, offering a significant bump travel gain. Our strut top increases the amount of caster the car has, and the impact on the toe curve is small but in the direction of being more preferable. A maximum of -4 deg front camber is possible when combined with camber bolts, although we target -3 as our preferred setting. We believe this will work with a range of coilovers that use an m12 thread at the top of their strut.
Product Contents
-
-
- Left and right side spherical bearing housings
- Left and right side alignment top plates
- Two replacement upper spring locators
- Replacement m12x1.25 low profile nuts
- Chassis protection gaskets
-
Notes:
- The customer is responsible for ensuring their coilover is compatible with this strut top. We recommend removing a front strut and checking the critical dimensions before ordering.
- You will need to adjust your ride height and get an alignment as part of the installation process.
