While the Honda Fit/Jazz doesn’t have the adjustability of earlier double wishbone/multi-link Civics, some small tweaks to parts and geometry can result in large dynamic improvements. Here is Honed’s receipe for suspension success on the GE8-generation.
GEOMETRY
- Ride height: 290-275mm (hub to apex of guard)
- OE front lower ball joint
- Honed strut top to increase caster and camber – LINK
- Camber bolts for maximum knuckle adjustment
SPRINGS & DAMPERS
- Front springs: 6kg/mm (results in ~2Hz suspension frequency)
- Rear springs: 6kg/mm (results in 2.2Hz suspension frequency)
- Dampers to suit spring rates
ANTI-ROLL BARS
- Stock front bar
- Aftermarket rear bar 16mm diameter or similar
WHEEL ALIGNMENT
- Front camber: -3.5-4.5°
- Front caster: +2-2.5°
- Front toe: 0°
- Rear camber: Not adjustable
- Rear toe: +2 (in)-0°
This is applicable to second-generation Honda Fit/Jazz models. Where a range is given it is listed from conservative to aggressive and should be selected based on tyre and driver preference.
RELATED POSTS
Wing or Air Brake?
Little infographic post about Wings! The following covers in brief why it's important to set up your rear wing with an appropriate angle of attack to maximise download and avoid generating too much drag. The last image gives an example of how you can measure the AOT...
What are “Good Brakes”?
