Honda Front Roll Centre Correction Ball Joints
$263.95 AUD
Kit Contents
- Pair of extended front ball joints to suit Honda knuckles
- Castle nuts and split pins
- Installation instructions
Suitable for:
1987-91 Honda Civic (EF/ED)
1988-91 Honda CR-X
1988-91 Honda Integra (DA)
1992-95 Honda Civic (EG)
1996-01 Honda Civic (EK)
1994-01 Honda Integra (DC2)
13 in stock
This kit includes a pair of ball joints that are intended to be pressed into Honda knuckles. This alters the outer pivot point of the front lower control arm for the purpose of correcting the front roll centre height.
Benefits:
- Increased front roll stiffness
- Recover the camber gain characteristic of the front suspension for a lowered ride height
- Improved turn in and chassis response
These benefits have been quantified by on-track testing and can be visualized by way of the onboard data record.
You can read about our track testing with the roll centre correction geometry kit in this blog post.
Our front roll centre kit is intended for vehicles that have our rear roll centre correction kit fitted.
Our geometry correction components are suited to vehicles with a ride heights between 320-295mm.
We recommend front spring rates in the range of 15-22kg/mm (850-1200lb/in).
Tools required for installation:
- Shop press
- External Circlip pliers
- A piece of tube with ~41mm ID, 50mm long (to aid installation of support sleeve)
- Torque wrench
